Hard seal electric butterfly valve also knows hard seal or tri eccentric electric butterfly valve. If the stem axis deviates from the disc center and the body center at the same time, and the rotation axis of the valve seat has a certain angle with the channel axis of the valve body, it is called three eccentric butterfly valve.
VINVAL HK60-D-G Series butterfly valve is triple off-set design which has advantage of light weight, compact design and cost effective, low operation torque and can replace traditional gate valve, globe & ball valve in most of industries application
Body | Valve components | ||
Size range | DN50~DN400 | Sealing material | PTFE |
Body material | Stainless Steel, Cast Iron, WCB | Core material | Stainless steel |
End conection | Wafer, Flange | Stem material | Stainless steel |
Operating pressure | 1.0, 2.5MPa | Applicable media | Water, oil, Gas, Liquid, steam, powder, anti-corrosive base |
Structure | Midline Structure/ A-type |
ON/OFF Type | Feedback: the active contact signal, passive contact signal, resistance, 4-20mA |
Regulation Type | Input & Output signal: DC 4-20mA, DC 0-10V, DC 1-5V |
Field operation | The Field, Remote Control Switch Regulation and MODBUS, PROFIBUS Field Bus |
Voltage Optional | AC110-240V 380V 50/60HZ: DC12V, DC24V, Special Voltage Can be Customized |
Protection Class | IP65, Explosion Proof Construction Are Available: EX ll BT4 |
Model | 05 | 10 | 16 | 30 | 60 | 125 | 250 | 400 |
Torque Output | 50Nm | 100Nm | 160Nm | 300Nm | 600Nm | 1250Nm | 2500Nm | 4000Nm |
● ON/OFF Type Electric Actuator: 90 degree rotation. AC/DC power supply, signal control and manual override. High torque up to 4000Nm.
● Modulating Type Electric Actuator: Adjust open/close angle from 0 to 90 degree. AC/DC power supply, signal control and manual override. High torque up to 4000Nm.
● Intelligent Type Electric Actuator: Adjust open/close angle from 0 to 90 degree. LED display screen to allow you check the open/close angle easier. AC/DC power supply, signal control and manual override. High torque up to 4000Nm.
Series | 5 | 10 | 16 | 30 | 60 | 125 | 250 | 400 |
Torque Output | 50Nm | 100Nm | 160Nm | 300Nm | 600Nm | 1250Nm | 2500Nm | 4000Nm |
90° Cycle Time | 20S | 15/30S | 15/30S | 15/30S | 30S | 100S | 100S | 100S |
Angle Of Rotation | 0-90° | 0-90° | 0-90° | 0-90° | 0-90° | 0-90° | 0-90° | 0-90° |
Working Current | 0.23A | 0.35A | 0.4A | 0.45A | 0.6A | 1.03A | 1.85A | 2.7A |
Drive Motor | 50W | 75W | 80W | 100W | 130W | 210W | 285W | 360W |
Mounting Standard | ISO5211 direct mounting | |||||||
Voltage Options | DC12V, DC24V, AC24V, AC110V, AC220V, AC380V | |||||||
Input Signal | 4-20mA, 1-5VDC, 0-10VDC | |||||||
Output Signal | 4-20mA, 1-5VDC, 0-10VDC | |||||||
Protection Class | IP65 protection class | |||||||
Ambient Temp | -20 to +60°C | |||||||
Wiring Diagram | A: ON/OFF type with light indicator signal feedback | |||||||
B: ON/OFF type with passive contact signal feedback | ||||||||
C: ON/OFF type with resisance potentiometer signal feedback | ||||||||
D: ON/OFF type with resistance potentiometer and neutral posistion signal feedback | ||||||||
E: Regulation type with servo control module | ||||||||
F: DC24/DC12V direct ON/OFF type | ||||||||
G: AC380V 3-phase power supply with passive signal feedback | ||||||||
H: AC380V 3-phase power supply with resistance potentiometer and neutral posistion signal feedback |
Copyright © 2017 Copyright by Phuc Minh Engineering Co., Ltd